CFSCP - CANON PC CARTRIDGE REPLACEMENT TONER
- MSDS: CFSCP
- Manufacturer: A QC GROUP WORLD HEADQUARTERS
- Product Name: CANON PC CARTRIDGE REPLACEMENT TONER
- National Stock Number: 6850-00N080177
Product Identification
Product ID:CANON PC CARTRIDGE REPLACEMENT TONER
MSDS Date:07/01/1995
FSC:6850
NIIN:00N080177
MSDS Number: CFSCP
Responsible Party
POMPANO BEACH, FL 33064
US
Emergency Phone: 305-970-8989
Info Phone: 305-973-1452
Cage: JO550
Contractor
Telephone: 954-970-8989
Cage: JO550
Ingredients
STYRENE ACRYLIC COPOLYMER
CAS: 25036-16-2
Fraction By Weight: 51-66%
OSHA PEL N/K
ACGIH TLV: N/K
MAGNETIC OXIDE
Fraction By Weight: 30-41%
OSHA PEL N/K
ACGIH TLV: N/K
CCA
Fraction By Weight: 0.5-4%
OSHA PEL N/K
ACGIH TLV: N/K
POLYWAX
Fraction By Weight: 2-6%
OSHA PEL N/K
ACGIH TLV: N/K
POST ADDITIVES
Fraction By Weight: 0.5-1.5%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NO KNOWN HEALTH HAZARD WHEN USE AS
INTENDED. INHALATION: GASPING & COUGHING - DON'T BREATHE IN THE
TONER. DO NOT INGEST.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:IMMEDIATELY FLUSH
W/POTABLE WATER FOR MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM MD
( ). SKIN:WASH WITH COLD WATER AND SOAP. FLUSH W/COPIOUS AMOUNTS OF
WATER. CALL MD .
Fire Fighting
Extinguishing Media:CO*2, WATER, DRY CHEMICAL EXTINGUISHER.
Fire Fighting Procedures:NONE. USE NIOSH APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:POSSIBLE CONDITIONS COULD CREATE A DRY
DUST EXPLOSION; AVOID SOURCES OF IGNITION.
Accidental Release
Spill Release Procedures:AVOID INHALATION; SWEEP MATERIAL UP AND
DISPOSE OF PROPERLY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE REQUIRED DURING PRINTING CYCLE. AVOID
DIRECT HEAVY INHALATION OF PRODUCT. NIOSH APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:GOOD GENERAL VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPEC GRAV:1.25-1.65 (H*2O=1).
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:
Vapor Density:
Evaporation Rate & Reference:
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:COMBUSTION WILL PRODUCE CARBON DIOXIDE
AND CARBON MONOXIDE.
Disposal
Waste Disposal Methods:THIS PRODUCT MAY BE PRODUCED FROM PLASTIC AND/OR
METAL. DISPOSAL MAY BE SUBJECT TO FEDERAL, STATE OR LOCAL LAWS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.